Creality Filament Dryer Box 2.0 vs SUNLU S2 Single-Spool Filament Dryer
Head-to-head spec comparison to help you pick the right environment upgrade for your needs.
Creality
$46
SUNLU
$79
Spec-by-Spec Comparison
| Spec | Creality Filament Dryer Box 2.0 | SUNLU S2 Single-Spool Filament Dryer |
|---|---|---|
| Category | Filament dryer | Filament dryer |
| Role | Budget 65 C dryer | Single-spool diagnostic dryer |
| Max Temp | 65 C | 70 C |
| Capacity | 1 spool | 1 spool |
| Active Heat | Yes | Yes |
| Active Airflow | Yes | Yes |
| Humidity Readout | Yes | Yes |
| Print Through | Yes | Yes |
| Ventilation | No | No |
| Resin Workflow | No | No |
| Abrasive Ready | No | No |
| Best Materials | PLA+, PETG, TPU | PETG, TPU, PLA+ |
| Footprint | Small bench box | Compact bench box |
| Price | $46 | $79 |
| Rating | 7.8/10 | 8.6/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
Creality Filament Dryer Box 2.0
Pros
- Affordable entry point for users who need a real 65 C dryer before buying a full humidity-control setup.
- Compact enough for cramped desks, dorm benches, and one-printer workstations.
- Best fit for occasional PETG, PLA+, and TPU rescue cycles where multi-spool capacity is unnecessary.
- Pairs well with sealed storage boxes: dry one spool, store the rest.
Cons
- Weaker than newer 70 C Space Pi units and multi-spool stations for serious nylon or engineering-filament work.
- A lower-cost dryer still needs discipline: label materials, track cycles, and store dry rolls immediately.
- Limited station capacity means you will outgrow it if you print several materials every week.
SUNLU S2 Single-Spool Filament Dryer
Pros
- Single-spool format is the right size for diagnosing whether wet filament is actually the cause of stringing, popping, and dull surfaces.
- Active heat and a compact footprint make it easier to leave on the bench than a food-dehydrator workaround.
- Print-through path supports long PETG or TPU prints without moving the spool back into room air.
- Good middle ground for users who need real drying but do not yet need a four-spool station.
Cons
- One spool at a time becomes frustrating once you rotate several colors or materials every week.
- You still need dry storage boxes for partial rolls after the drying cycle.
- No single dryer can fix under-extrusion, retraction, or temperature mistakes that only look like moisture.
Our Verdicts
Creality Filament Dryer Box 2.0
The Creality Filament Dryer Box 2.0 is the value move for a bench that needs moisture diagnosis more than a permanent drying station. Buy it when you want to prove wet filament is the problem cheaply; step up to SUNLU S2, Space Pi Plus, or a multi-spool station when higher temperature, longer timers, or multiple rolls matter.
SUNLU S2 Single-Spool Filament Dryer
The SUNLU S2 is the most practical first filament dryer for a small Print Climate bench. It gives you a repeatable moisture-control step without forcing a huge workstation change, and it pairs naturally with sealed dry boxes once you have more than two active rolls.